Canon iR3225 Guide

4
Special Copying and Mail Box Features
4-40 Job Done Notice
Job Done Notice
This mode enables you to set the machine to notify you through e-mail when the current copy job is
done. This is especially useful when you are waiting in line for a large copy job to complete or when
you are using the Remote or Cascade Copy mode.
Remark
To be able to set the Job Done Notice mode, you must
first store your e-mail address in the Address Book.
(See the Sending and Facsimile Guide.)
The Job Done Notice can be set only if the colour
Universal Send Kit is activated.
1. Place your originals → press [Special Features] → [Job Done Notice].
2. Select the destination of the job done notice → press [OK].
If you select a destination that is stored with an access number, press [Access Number] and
then enter the access number using - . If you press [No Access Number], the
destinations that are not managed with an access number are displayed.
For instructions on selecting a destination, see the Sending and Facsimile Guide.
Acesst 1.0 6251194

Canon iR3225 Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Monthly Duty Cycle	50, 000 pages
Paper Output	250 Sheets
Duplex Printing	Yes
Print Speed	25 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	25 cpm
Scan Resolution	600 x 600 dpi
Paper Capacity	550 sheets
Connectivity	USB, Ethernet
Warm-up Time	Less than 30 seconds
Paper Input (Standard)	550 sheets
Media Sizes	A4, A5, B5, Legal, Letter, Executive
Zoom	25-400%
Functions	Print, Copy, Scan
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac