Name: Canon MX470 series
Brand: Canon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Changing the Settings in the Wired LAN Sheet

Note

• This screen is not available depending on the printer you are using.

• Activate the wired LAN setting of the printer to change the settings in the Wired LAN sheet.

Start up IJ Network Tool.

Select the printer in Printers:.

Click the Configuration... button.

Click the Wired LAN button.

Change the settings or confirm.

Click OK after changing configuration. A screen is displayed asking you for confirmation before the

settings are sent to the printer. If you click OK, the settings are sent to the printer and the Transmitted

Settings screen is displayed.

TCP/IP Setting:

Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for your

network environment.

Get IP address automatically

Select this option to use an IP address automatically assigned by a DHCP server. DHCP

server functionality must be enabled on your router.

Use following IP address

If no DHCP server functionality is available in your setup where you use the printer or you

want to use a particular IP address, select this option to use a fixed IP address.

192

Questions and Answers:

Need help?

Do you have a question about the Canon MX470 series and is the answer not in the manual?

Canon MX470 series Specifications

General