Name: Canon MX470 series
Brand: Canon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Key to Enjoying Consistent Printing Quality

The key to printing with the optimal printing quality is to prevent the print head from drying or clogging.

Always observe the following rules for optimal printing quality.

Never unplug the power cord until the power is turned off!

If you press the ON button to turn off the power, the machine caps the print head (nozzles) automatically

to prevent from drying. If you unplug the power cord from the wall outlet while the POWER lamp is lit or

flashing, the print head will not be capped properly and this will cause drying or clogging.

When unplugging the power cord, make sure that the POWER lamp is not lit.

Important

• If the power cord is unplugged, the date/time settings will be reset and all documents stored in the

machine's memory will be lost. Send or print a necessary document before unplugging the power

cord.

Print periodically!

Just as the tip of a felt pen becomes dry and unusable if it has not been used for a long time, even if it is

capped, the print head too, may become dried or clogged if the machine has not been used for a long

time.

We recommend you to use the machine at least once a month.

Note

• Depending on the type of paper, ink may blur if you trace the printed area with a highlight pen or

paint-stick, or bleed if water or sweat comes in contact with the printed area.

215

Questions and Answers:

Need help?

Do you have a question about the Canon MX470 series and is the answer not in the manual?

Canon MX470 series Specifications

General