Name: Canon MX470 series
Brand: Canon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Network Scan Settings

You can connect your scanner or printer to a network to share it among multiple computers or scan images

into a specified computer.

Important

• Multiple users cannot scan at the same time.

• To scan over a network, enable Bonjour on your scanner or printer.

Note

• Complete the network settings of your scanner or printer beforehand by following the instructions on the

web page.

• With network connection, scanning takes longer than USB connection.

Setting for Scanning with IJ Scan Utility

In the IJ Scan Utility main screen, select your scanner or printer that is connected to a network.

Start IJ Scan Utility.

Select "Canon XXX series Network" (where "XXX" is the model name) for Product

Name.

You can scan via a network connection.

Note

• If you cannot scan, check that your scanner or printer is selected in the network selection

screen.

• For USB connection, select "Canon XXX series" (where "XXX" is the model name) for Product

Name.

Setting for Scanning from the Operation Panel

You can make the setting for scanning from the operation panel.

1. Start IJ Scan Utility.

2. Click Settings....

The Settings dialog appears.

3. Click the (General Settings) tab.

417

Questions and Answers:

Need help?

Do you have a question about the Canon MX470 series and is the answer not in the manual?

Canon MX470 series Specifications

General