• Make sure to initialize all memory cards
before using them with this camcorder for the
first time (OJ 66).
• MBmory cards have front and back sides that
are not interchangeable. Inserting a memory
card facing the wrong direction can cause a
malfunction
of
the camcorder.
Proper operation cannot be guaranteed for all
miniSD cards.
Preparing
the
Camcorder
1 Turn on the camcorder.
The lens cover will open automatically.
2 Adjust the viewfinder.
Keep the LCD panel closed to use the
viewfinder and adjust the dioptric
adjustment lever as necessary.
3 Fasten the grip belt.
Adjust the grip belt so
that
you can
reach the zoom lever with your index
finger, and the START/STOP button
with your thumb.
The
Wireless
Controller
Inserting
the
Battery
(Lithium
Button
Battery
CR2025)
®
W~2i
..
~.
~
•.•
CD
W .
~
~.
" I
'::
..
~
Tab
1 Press the tab in the direction
of
the
arrow and pull out the battery
holder.
2 Place the lithium button battery with
the + side facing up.
3 Insert the battery holder.
Using
the
Wireless
Controller
Point the controller at the camcorder's
remote sensor when you press the
buttons.
• The wireless controller may not work properly
when the remote sensor
is
situated under
strong light sources or direct sunlight.
• Ifthe wireless controller does not work, check
that [WL.REMOTE] is not set to [OFF
((laID]
(OJ 44). Otherwise, replace the battery.
•