I
Connecting
to
a
Computer
•••••
----------------------
._----\
,
I
~~
_ -
..
...!
Transferring
Images
•
We
recommend powering the camcorder
using the compact power adapter.
• Refer also to the computer's instruction
manual.
• Users of Windows
XP,
Windows Vista
and
MacOS
X:
Your
camcorder
is
equipped with the standard
Picture Transfer Protocol (PTP) allowing
you
to
download still images (JPEG only) simply
by
connecting the camcorder
to
a computer using
the
USB
cable without installing the software
from the supplied software CD-ROM.
Transfers only those images that have not
yet been transferred to the computer.
• When the CARD access indicator
is
on
or
flashing
do
not perform the following actions.
Doing
so
may result
in
permanent data loss.
-
Do
not open the memory card slot cover
and
do
not remove
the
memory card.
-
Do
not disconnect the USB cable.
-
Do
not turn off the camcorder or the computer.
-
Do
not change the position of
the
~
/
G:l
switch or the operating
mode.
• Operation may not work correctly depending
on
the software
and
the specifications/settings
of your computer.
• The image files
on
your memory card are
valuable, original data files. If you wish
to
use
the
image files
on
your computer, make copies
of them first,
and
use the copied file, retaining
the
original.
.I~·T~N'~·F:E~9·~D~RS]
Transfers images with transfer orders
(CD
79) to the computer.
00
(CD
10)
I
The
first
time
you
connect
the
camcorder
to the
computer,
you
need
to install the
software
and
set
the
auto-launch
setting.
From
the
second
time
on, you will
only
need
to
connect
the
camcorder
to
the
computer
to
transfer
images.
1 Install
the
supplied
Digital Video
Software.
Refer
to
the
installation
guide
(separate
leaflet
included
with
the
CD-ROM).
2 Set
the
camcorder
to
I PlAY·1:] I
mode.
3
Connect
the
camcorder
to
the
computer
using
the
USB
connection
-connection
type
[J
(CD
76)-
shown
in the
previous
section
PC
Connection
Diagrams.
See
Connecting the
Camcorder
to
a
Computer
in
the
Digital Video
Software
instruction
manual
(electronic
version
on
PDF
file).
4
Set
the
auto-launch
setting.
•
See
When Connecting the
Camcorder
to
a
Computer
(Windows)
or
Auto-downloading
(Macintosh)
in
the
Digital Video Software
instruction
manual
(electronic
version
on
PDF
file).
•
The
direct
transfer
menu
appears
on
the
camcorder
screen
and
the
~
tfV
button
lights up.
Preparations
Transferring
Still
Images
- Direct
Transfer
With
the
supplied
USB
cable
and
the
Digital
Video
Software,
you
can
transfer
still
images
to
a
computer
simply
by
pressing
I~
~
(print/share).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
