30
Inserting/Removing a Memory Card
You can use SD memory cards or commercially available MultiMediaCards (MMC) with this
camcorder. The SD memory card has a protect switch to prevent accidental erasure.
Inserting the Card
1. Set the POWER dial to OFF.
2. Open the memory card slot cover.
3. Insert the memory card straight, all the way
into the card slot.
4. Close the card slot cover.
Do not force the cover closed if the card is not
correctly inserted.
Removing the Card
Do not forcefully remove the memory card without first pushing it in to release it.
1. Set the POWER dial to OFF.
Make sure that the CARD indicator is not flashing
before you turn off the camcorder.
2. Open the memory card slot cover.
3. Push the memory card to release it and
then remove the memory card.
4. Close the card slot cover.
This camcorder is compatible with SD Memory Cards or MultiMediaCards (MMC) only. Do not use
any other type of memory cards.
Proper operation cannot be guaranteed for all memory cards.
Turn off the camcorder before inserting or removing the memory card. Otherwise, it may result in
lost data.
If you use memory cards other than the supplied one, make sure to initialize them with the
camcorder ( 128).
To Next Page
Loading...
Need help?
General
