102
English
Caution: This function does not limit the output volume level of the Soundbar 10 to a certain level but only the selectable volume.
Based on the incoming signal (level) the output volume can be higher or lower.
Display Setup [UIS]
The menu Display Setup includes all functions for the display in the front and the On-Screen menu.
Language [LAN]
With this option you can change the On-Screen menu (OSD) language on your TV / Projector from German to English and backwards.
To change the language please proceed as follows:
1
To enter the menu, press the "M" button.
2
Use the " " or " " button to navigate to the menu System Setup [SYS] and confirm with the "OK" button.
3
Use the " " or " " button to select the menu Display Setup [UIS] and confirm with the "OK" button.
4
Use the " " or " " button to select the menu item Language [LAN] and confirm with the "OK" button.
5
Use the "+" or "–" button to select the desired language.
6
Confirm and exit the menu item by pressing the "M" button.
LED Flashing [LED]
With this option you can deactivate the flashing of the green LED in the front to indicate the missing network setup and turn the red and green
LED on permanentely instead.
To change the missing network indication please proceed as follows:
1
To enter the menu, press the "M" button.
2
Use the " " or " " button to navigate to the menu System Setup [SYS] and confirm with the "OK" button.
3
Use the " " or " " button to select the menu Display Setup [UIS] and confirm with the "OK" button.
4
Use the " " or " " button to select the menu item LED Flashing [LED] and confirm with the "OK" button.
5
Use the "+" or "–" button to select the desired LED indication and confirm with the "OK" button.
6
Exit the menu item by pressing the "M" button.
Input Stream Display [ISD]
With this option you can deactivate (Manual) or activate (Auto) the appearance of the info bar on your TV screen with informations about the
inut stream, playmode and volume.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
