104
English
5
Use the "+" button to activate (On / [ON]) resp. the "–" button to deactivate(Off / [OFF]) the desired playmode and confirm by pressing the
"OK" button.
6
To activate or deactivate a different playmode please repeat the steps 4 and 5.
7
Exit the menu item by pressing the "M" button.
Factory Reset [RES]
With this function you can reset the Smart Soundbar 10 to its factory settings. In case the Soundbar 10 has a mailfunction or does not connect to a
network anymore, please perform such a reset and repeat the installation process before you contact the customer support.
Caution: ALL settings you have made, learned IR codes, the WiFi connection and paired (mobile) devices and speakers will be deleted!
To perform the reset using the Smart remote please do as follows:
1
Power up your Soundbar 10 by pressing the Power button " " on the remote.
2
To enter the menu, press the "M" button.
3
Use the " " or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button.
4
Use the " " or " " button to select the function Factory Reset [RES] and confirm with the "OK" button.
The OSD shows the menu Factory Reset and "No" is selected, the display shows [NO].
5
If you want to cancel the reset precedure, press the "OK" button, or press the "M" button.
6
If you want to perform the reset, select "Reset all" using " " or " " key and press the "OK" button. The display shows [YES].
7
The OSD shows “Please Wait”, the display still shows [YES]. After about 10 seconds the Soundbar 10 turns off and starts up again.
During the starting process the LED flashes green rapidly.
To perform the reset using the touch keys please do as follows:
1
Power up your Soundbar 10 by pressing the Power button " " on the touch panel.
2
To enter the menu, press and hold the input select key " " for at least 3 seconds.
3
Use the "+" or "–" button to navigate into the menu System Setup [SYS] and confirm with the Play/Pause button " ".
4
Use the " " or " " button to select the function Factory Reset [RES] and confirm with the Play/Pause button " ".
The OSD shows the menu Factory Reset and "No" is selected, the display shows [NO].
5
If you want to cancel the reset precedure, press the Play/Pause button " " or press the input select key " " The Display changes back to
the menu System Setup [SYS] and the LED display shows [RES] again.
6
If you want to perform the reset, select "Reset All" using " " or " " button and press the Play/Pause button " ". The display shows [YES].
7
The OSD shows “Please Wait”, the display still shows [YES]. After about 10 seconds the Soundbar 10 turns off and starts up again. During the
starting process the LED flashes green rapidly.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
