Canton Smart Soundbar 10 User Manual

86
English
Automatic Updates
After you have connected the Soundbar 10 to the network, firmware updates are executed automatically. After each connection to the power supply
and at regular intervals (also in standby mode), the Soundbar 10 searches for an update and installs this, if available. The LED flashes green/red
during the update and the display first shows „DOWNLOADING“, then „UPDATING“. During this time the Soundbar 10 is not operable.
To do this, the Soundbar 10 must have been connected to the network router via the Google Home app or an iOS device (by use of WLAN) or
alternatively by a network cable (by use of LAN).
Attention: Do NOT disconnect the Soundbar 10 from the power supply during an update process!
Menu Structure and Navigation
Overview
Most settings of the Smart Soundbar 10 are included into the main menu. This settings menu is controlled by the infrared remote control delivered
with the device. The settings menu is displayed by the OSD (On Screen Display). The LED display in the Soundbar shows the respective function in
the form of an abbreviation when the menu is activated. This means that the Soundbar can also be adjusted without a screen. Below, please find an
instruction how to navigate through the menu:
• To enter the menu, press the "M" button.
• To enter the next menu level, press the "OK" button.
• To navigate upwards or downwards in the menu, press the Up " " or Down " " key.
• To change the value of a parameter, press the "+" (Volume +) or "–" (Volume -) button.
• To enter the previous menu level, press the "M" button.
• To exit the menu:
a) Either press and hold the "M "button until the selected input (e.g. TV) is displayed, or
b) wait for 30sec without pressing any button on the remote control.
Practical tip:
• To change the language of the On-screen display from German to English, please go to the main menu by pressing the button „M“.
Under „Systemeinstellung“ [SYS] select the menu item „Displayeinstellungen“ [UIS] and change the language under the menu item „Sprache“
[LAN].

Canton Smart Soundbar 10 Specifications

General

Audio decoders	DTS Digital Surround, DTS TruSurround, Dolby Digital
RMS rated power	300 W
Audio output channels	2.1.2 channels
Audio Return Channel (ARC)	Yes
Woofer diameter	79 mm
Tweeter diameter	19 mm
Mid-range driver diameter	50 mm
Woofer diameter (imperial)	3.1 \
Tweeter diameter (imperial)	0.75 \
Mid-range driver diameter (imperial)	2 \
HDMI in	3
Bluetooth version	4.0
HDMI ports quantity	4
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Cables included	AC, Audio (3.5mm), Coaxial, HDMI, Optical
Receiver included	-
FM radio	No
Display type	LED
Certification	CE
Product color	Silver
Bluetooth range	10 m
Transmission frequency	2.4 GHz
Apple docking compatibility	Not supported
AC input voltage	100 - 240 V
AC input frequency	50 / 60 Hz
Soundbar power consumption	150 W
Power consumption (standby)	0.4 W

Weight and Dimensions

Depth	100 mm
Width	990 mm
Height	70 mm
Soundbar weight	5300 g