3
89
English
DRC [DRC]
Dynamic Range Control (DRC) is a setting option created by Dolby Laboratories. When activated, the dynamic range of encoded data
streams can be automatically reduced, which also reduces differences in volume. This makes it possible to enhance quiet tones and
suppress loud ones. By default this function is deactivated.
To change the setting, do the following:
1
To enter the menu, press the "M" button.
2
Use the " " or " " button to navigate into the menu Speaker Setup [SPS] and confirm with the "OK" button.
3
Select the function DRC [DRC] and confirm with the "OK" button.
4
Select the wanted value using the "+" or "–" key:
[ON] means the DRC function is activated and the dynamic range is controlled by the meta data of the data stream.
[OFF] means the function is deactivated and the dynamic range will not be controlled.
5
Press the "M" button to exit this menu item.
Voice Clarity [VOI]
Use the “Voice Clarity” function to improve the speech intelligibility. This allows you to better understand dialogues (speech) in films with loud
effects, for example.
To activate respectively deactivate the function, please do as follows:
1
To enter the menu, press the "M" button.
2
Enter the first menu item Speaker Setup [SPS] and press the "OK" button.
3
Use the " " or " " button to navigate to the item Voice Clarity [VOI] and confirm with the "OK" button.
4
Use the "+" or "–" button to activate resp. deactivate the “Voice” function.
On [ON] = Function actiated
Off [OFF] = Function deactivated
4
Press the "M" button to exit this menu item.
Speaker EQ (Equalizer)
The Equalizer menu allows you to select three different equalizers for the Soundbar or the front left and right speakers [FLR], surround left and right
[SLR], the top speakers left and right [TLR], as well as the subwoofer [SUB] to match the room conditions. Only physically available speakers are
displayed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
