EN-17
Playing Notes with Different Tones
Transpose lets you raise or lower the overall pitch of the
Digital Piano in semitone steps.
You can use this feature to raise or lower the keyboard key
and to play a piece in a key that is more comfortable for you,
or to adjust to a key that better matches a vocalist, etc.
■ To change the transpose setting
1.
While holding down 8 GRAND PIANO, press
the E3 or F3 keyboard key.
• You can change the pitch of the keyboard within the
range of –12 to +12 semitones.
2.
After the setting is the way you want, release
8 GRAND PIANO.
Use the tuning feature when you need to adjust the pitch
slightly to play along with another musical instrument.
• The tuning feature specifies the frequency of the A4 note.
You can set a frequency within the range of 415.5 to
465.9 Hz. The initial default setting is 440.0 Hz.
• You can change the frequency in 0.1 Hz steps.
■ To change the tuning setting
1.
Hold down 3 FUNCTION.
• Do not release 3 FUNCTION until step 3, below.
2.
Use the keyboards keys below to adjust tuning.
* A reference tone (page EN-11) sounds whenever the
setting values becomes an integer (whole number), such as
440, 441, etc.
3.
After selecting the tuning you want, release
3 FUNCTION.
• The adjusted tuning setting is retained even if you turn
off power.
Changing the Pitch in Semitone
Steps (Transpose)
Pressing this key: Does this:
E3 Lowers the pitch one semitone.
F3 Raises the pitch one semitone.
E3 + F3 Returns pitch to the initial default
setting.
Fine Tuning a Pitch (Tuning)
Pressing this key: Does this:
G4 Lowers the A4 frequency 0.1 Hz.*
A}4 Raises the A4 frequency 0.1 Hz.*
A4 Sets the A4 frequency to 440.0 Hz.
B}4 Sets the A4 frequency to 442.0 Hz.
To Next Page
Loading...
Need help?
General
