Playing Notes with Different Tones
EN-20
Chorus is a function that adds depth and breadth to notes.
■ To apply a chorus effect to a tone
1.
While holding down 4 SOUND MODE, press
a keyboard key from E2 through A}2.
2.
Release 4 SOUND MODE.
Brilliance can be used to make a sound brighter or mellower.
■ To adjust brilliance
1.
While holding down 4 SOUND MODE, press
the A2 or B}2 keyboard key.
• You can specify a setting value in the range of –3 to
+3. A setting of +1 or greater gives notes a brighter
feel, while –1 or less makes notes sound more mellow.
2.
After the setting is the way you want, release
4 SOUND MODE.
Using Chorus
Pressing
this key:
Selects this
setting:
Which does this:
E2 Tone Specifies the initial setting
of each tone.
F2 1 Applies light chorus.
F{2 2 Applies medium chorus.
G2 3 Applies deep chorus.
A}2 4 Applies a sweeping flanger
effect.
Using Brilliance
Pressing this key: Does this:
A2 Lowers the brilliance setting by 1.
B}2 Raises the brilliance setting by 1.
A2 + B}2 Returns brilliance to the initial default
setting.
C1A0 C2 C3 C4 C5 C6 C7 C8
B}2A2