Troubleshooting
EN-58
Error Indicators
Indicators Cause Action
The USB flash drive is not plugged correctly into
the Digital Piano’s bl USB Type A port.
Plug the USB flash drive correctly into the
bl USB Type A port.
The USB flash drive was removed while some
operation was in progress.
Do not remove the USB flash drive while any
operation is in progress.
The USB flash drive is write-protected. Write-enable the USB flash drive.
The USB flash drive is protected by anti-virus
software.
Use a USB flash drive that is not protected by
anti-virus software.
There is no loadable or playable file in the
MUSICDAT folder.
Move the file you want to load or play to the
MUSICDAT folder (page EN-40).
You are attempting to save data to a USB flash
drive when there is no data to save.
Record something before performing a save
operation.
You are attempting to save data with a name
that is already used for another read-only file on
the USB flash drive.
• Rename the file on the USB flash drive to
something else and then save it.
• Remove the read-only attribute from the
existing USB flash drive file and overwrite it
with the new data.
• Use a different USB flash drive.
There is not enough room available on the USB
flash drive.
Delete some of the files on the USB flash drive
to make room for new data or use a different
USB flash drive.
You are attempting to use the audio recorder to
record when there are already 99 songs
recorded. TAKE99.WAV (page EN-34) or
TAKE99.MP3 (page EN-29) already exist in the
MUSICDAT folder on the USB flash drive.
Use a computer to move the MUSICDAT folder
containing files TAKE**.WAV (** = 01-99) or
TAKE**.MP3 (** = 01-99) to another folder or
drive.
An attempt was made to read or play a file in
SMF format 2.
The SMF format that can be read and played
back by the Digital Piano is “0” or “1”.
The file on the USB flash drive is too large to
play on this Digital Piano.
Your Digital Piano can play back SMF files up to
approximately 100 KB in size.
To Next Page
Loading...
Need help?
General
