Recording/Playing Back Performances
EN-34
■ To record a keyboard performance onto a USB
flash drive
1.
Perform the procedure under “Prepare to use
the Audio Recorder” (page EN-33).
2.
Touch 70 (REC) so its LED lights white.
This enters record standby, which is indicated by flashing
of the 70 (REC) (red) and 6 a (white) LEDs.
• To cancel recording, touch 70 (REC) again.
3.
To start recording, play something on the
keyboard or touch 6 a.
This causes the 70 (REC) LED to change from
flashing red to lit red, indicating that recording is in
progress.
• The maximum allowable recording time with the audio
recorder is approximately 25 minutes, after which recording
will stop automatically. 70 (REC) will start to flash to let
you know when you are running out of recording time, so
end your recording as soon as possible after flashing starts.
• If you make a mistake and want to restart recording from
the beginning, hold down 70 (REC) during recording
(after the operation in Step 3 above) until it blinks. The
recording will be discarded, and the Digital Piano will wait
for you to resume recording from Step 3 above.
4.
To stop recording, touch 70 (REC) or
6 a.
This causes the 70 (REC) LED to light white again.
• This will store the recording as a WAV file to the USB
flash drive. Files are automatically assigned names in
sequence from “TAKE01.WAV” through
“TAKE99.WAV”.
• The saved file is selected automatically.
5.
To play back the song you just recorded, touch
6 a.
• Files recorded by the audio recorder are saved with a
filename that follows the last MP3 or WAV audio file.
■ To select and playback a file recorded with the
audio recorder
1.
Perform the procedure under “Prepare to use
the Audio Recorder” (page EN-33).
2.
While holding down 6 a, press one of the
keyboard keys below to select the song you
want to listen to.
• For information about how to input numbers and the
keyboard keys you should use for input, see “Inputting
Song Numbers Using the Song Selection Keyboard
Keys (10-key)” (page EN-10).
3.
Release 6 a.
4.
To start playback, touch 6 a.
• Playback stops automatically when the end of the file
is reached. To stop playback part way through, touch
6 a.
• In addition to WAV files recorded with the audio recorder,
any standard WAV file can also be played back. For details,
see “Playing Standard Audio Data (WAV files)” (page
EN-40).
Pressing
this key:
Does this:
C1 to A1 Use the keyboard keys to enter the
TAKE **. WAV (** = 01 to 99) number.
B0 Selects the next song number.
B}0 Selects the previous song number.
B}0
C8
C1 - A1
To Next Page
Loading...
Need help?
General
