Reference
EN-62
■ Environment
• Place the Digital Piano onto a stable and flat surface. If you
want to place the Digital Piano on a table or other surface
instead of a separately available stand, place it on a stable
and flat surface where the entire bottom of the Digital Piano
fits within that surface.
• To prevent the formation of mold, set up the product in a
well-ventilated location where the temperature and humidity
ranges shown below are maintained.
– Recommended temperature range: 15 to 25°C
– Recommended humidity range: 40 to 60% RH
• Do not set up the product in locations subject to extreme
variations in temperature and/or humidity. Doing so can
cause metal components to rust, coatings to degrade, and
components to warp and split.
■ User Maintenance
• Wipe the product with a soft, dry cloth. Do not use a tissue,
which can cause scratching.
• When soiling is more serious, moisten a soft cloth with a
weak solution of water and a mild neutral detergent, wring
out all excess moisture from the cloth, and then wipe the
product. After that, wipe again with a separate soft dry
cloth.
• Do not use any cleaning agents, chlorine disinfectants,
sanitizing wipes, or other items that include benzene,
organic solvents, alcohol, or other solvents for cleaning.
Doing so can cause discoloration, deformation, paint
peeling, cracking, etc.
■ Sterilization and Disinfection
• After wiping the product two or three times with a non-
alcohol sanitizing wipe, use a soft, dry cloth to wipe it dry.
• Note that failure to wipe the product dry can cause streaks
to remain.
• If the product is used by multiple parties, hand disinfection
before each use is recommended.
■ Included and Optional Accessories
Use only accessories that are specified for use with this
product. Use of unauthorized accessories creates the risk of
fire, electric shock, and personal injury.
■ Weld Lines
Lines may be visible on the exterior of the product. These are
“weld lines” that result from the plastic molding process. They
are not cracks or scratches.
■ AC Adaptor Handling Precautions
• Never connect the AC adaptor (JEITA Standard, with
unified polarity plug) that is specified with this Digital Piano
to any other device besides this Digital Piano.
Doing so creates the risk of malfunction.
• The AC adaptor cannot be repaired. If your AC adaptor
malfunctions or becomes damaged, you need to purchase
a new one.
• AC adaptor operating environment:
Temperature: 0 to 40°C
Humidity: 10% to 90% RH
• Output polarity: &
• Use of a different type AC adaptor can cause smoking or
malfunction.
■ Batteries
Note the precautions below when using rechargeable
batteries.
(Models that support use of rechargeable batteries only)
• Use Panasonic Group AA-size eneloop rechargeable
batteries.
Do not use any other type of batteries.
• Use only the specified charger to charge batteries.
• Rechargeable batteries must be removed from the product
for charging.
• For information about using eneloop batteries or their
specified charger, be sure to read the user documentation
and precautions that come with each item, and use them
only as directed.
Be sure to replace batteries at least once a year, even if there
is no indication of low battery power. Dead rechargeable
batteries (eneloop) in particular may deteriorate if they are left
in the product. Remove rechargeable batteries from the
product as soon as possible after they go dead.
■ About the front panel
Operating the front panel when it is dusty or dirty may scratch
it.
Gently wipe the panel with a soft, clean cloth to remove dust
and dirt before use.
Use your fingers to operate the front panel. Using fingernails
or sharp objects may scratch the surface.
Operating Precautions
To Next Page
Loading...
Need help?
General
