USB Flash Drive
EN-40
5.
Press the C1 keyboard key.
This starts the delete operation. The LEDs above
4 SOUND MODE and 6 a will light sequentially
from left to right during the delete operation.
6.
Release 3 FUNCTION when deleting starts.
The LEDs stop lighting sequentially when the delete
operation is complete.
You can use the same operations as those for built-in songs
to play back files of the formats below, which are stored in the
MUSICDAT folder.
• Standard MIDI files (SMF format 0/1) or CASIO MIDI files
(CMF format)
1.
Connect the USB flash drive to your computer.
2.
Create a folder named MUSICDAT in the root
directory of the USB flash drive.
• This step is not required if there is already a
MUSICDAT folder in the USB flash drive’s root
directory.
3.
Copy song data you want to play back on the
Digital Piano to the MUSICDAT folder.
• For information about the song data playback
operation, see “Playing MIDI Data (MIDI Player)”
(page EN-28).
Performing a record operation with the Digital Piano’s audio
recorder creates a folder named MUSICDAT on the USB flash
drive. WAV files are stored in the MUSICDAT folder,
automatically assigning them names from TAKE01.WAV to
TAKE99.WAV. You also can connect a USB flash drive to a
computer and change the names of audio data (WAV) files to
the format “TAKEXX*.WAV”, and move them to the
MUSICDAT folder. Then you will be able to play them back on
the Digital Piano.
* XX = 01 to 99
Supported WAV format (Linear PCM, 16bit, 44.1 kHz, stereo)
• You can also play MP3 files (.MP3). See “Playing MP3
Audio Files” (page EN-29).
Using a Computer to Copy
General Song Data to a USB Flash
Drive
Playing Standard Audio Data
(WAV files)
To Next Page
Loading...
Need help?
General
