NIAGARA SCX WEB INTERFACE
Alternatively, the Cisco Digital Media Encoder 2000 informs you of an alert when the Alarm
Indicator Light on the front panel of the system turns red. When this occurs on the Cisco Digital
Media Encoder 2000 system, to determine what the alerts are, you must press the Help, or “i,”
button, which will cycle the alerts occurring. The following screen showing an alert might look as
follows:
Alerts will cycle the information in the display when the Cisco Digital Media Encoder 2000 is idle
until all alerts have been identified, then the screen will return to its normal system cycling, and the
alerts will not be shown again on the Cisco Digital Media Encoder 2000.
Cisco Digital Media Encoder 2000 User Guide 132
To Next Page
Loading...
Need help?
General
