TUTORIAL: GETTING TO KNOW YOUR CISCO DIGITAL MEDIA ENCODER 2000
Viewing the Cisco Digital Media Encoder 2000 Activity Log
The Activity Log records the Encoder Start and Stop events. To view the Activity Log, move the
mouse pointer over Status in the menu bar and click on Activity Log in the drop-down menu.
The log is updated for every event on the Cisco Digital Media Encoder 2000. The log now includes
the starting and stopping events for the encoder from the previous sections.
Each event is date and time stamped. Pressing the Clear Activity Log button in the upper-right clears
all logged activities.
Configuring the EZStream Buttons
The Cisco Digital Media Encoder 2000 provides one-button streaming via the EZStream® buttons
located on the front panel of the system. By default, these buttons are not assigned to an encoder.
The Niagara SCX Web Interface is used to configure each button to a specific encoder.
Move your mouse pointer over Encoders in the menu bar and click Preset A in the drop-down menu.
Encoder Preset (A, B, and C)
The Cisco Digital Media Encoder 2000 provides one-button streaming via the EZStream buttons
located on the front panel of the system. By default, these buttons are not assigned to an encoder.
The Niagara SCX Web Interface is used to configure each button to a specific encoder. The controls
to configure these buttons are located in the Encoder Preset A, Encoder Preset B, and Encoder
Preset C pages.
Cisco Digital Media Encoder 2000 User Guide 26
To Next Page
Loading...
Need help?
General
