Cisco 2000 User Manual

INSTALLATION GUIDE
Package Contents
Completely unpack all of the contents from the box and inspect each item for damage and ensure
that you have all of the components listed below:
• Cisco Digital Media Encoder 2000 system
• Power Cable
• BNC-to-RCA Converter, Male-to-Female (8)
• Cisco Digital Media Encoder 2000 User Guide
• Cisco Digital Media Encoder 2000 Quick Start Guide
• 75 OHM BNC Terminator
• 1 Pair Rack Slide Rails
• 2 Rack Handles
• 1 Niagara Software CD
• 1 Niagara SCX CD
If any of these components are missing or damaged, do not continue with the installation. Contact
the reseller from which you purchased your Cisco Digital Media Encoder 2000 system for assistance
in obtaining any missing parts or for parts replacement.
The encoder serial number is located on the right side of the chassis.
Warning
Installation of the equipment must comply with local and national electrical
codes.
Related Documentation
For other Digital Media System documentation, see
http://www.cisco.com/en/US/products/hw/video/tsd_products_support_category_home.html.
-4-

Cisco 2000 Specifications

General

Brand	Cisco
Model	2000
Category	Media Converter
Language	English