TUTORIAL: GETTING TO KNOW YOUR CISCO DIGITAL MEDIA ENCODER 2000
After logging in, you will have access to all of the Web-enabled functions including encoder
operations, management, and system configuration tools.
NOTE: If you cannot browse to the Cisco Digital Media Encoder 2000 using its machine name, type
in the Cisco Digital Media Encoder 2000 IP address instead. This information is also available from
the Cisco Digital Media Encoder 2000 is Ready window when the system is idle.
Starting an Encoding Session
To start an encoding session, move the mouse pointer over Encoders in the menu bar and click on
All Encoders in the drop-down menu.
All of the encoder profiles loaded on the Cisco Digital Media Encoder 2000 will be presented in a
list indicating format and current status.
Press the red Stream icon located in the right column of the encoder you wish to start.
Cisco Digital Media Encoder 2000 User Guide 23
To Next Page
Loading...
Need help?
General
