Cisco 3750G-12S - Catalyst Switch - Stackable User Manual

D-4
Catalyst 3750 Switch Hardware Installation Guide
OL-6336-09
Appendix D Configuring the Switch with the CLI-Based Setup Program
Stacking the Switches (Optional)
Stacking the Switches (Optional)
You can stack up to nine switches by using the StackWise cables and ports to connect the switches (see
Figure D-2). Read the “Planning the Stack” section on page 2-8 before you stack your switches.
Figure D-2 Stacking the Switches
Step 1 Insert one end of the StackWise cable into the StackWise port at the back of a switch. See Figure D-3.
Note Always use a Cisco-approved StackWise cable to connect the switches.
Step 2 Use the window in the StackWise cable to align the connector correctly. Secure the screws tightly.
Step 3 Insert the other end of the cable into the connector of the other switch, and secure the screws tightly.
See the “Connecting StackWise Cable to StackWise Ports” section on page 2-30 for detailed installation
procedures on how to connect the switches in a stack.
Figure D-3 Connecting the StackWise Cable to a StackWise Port
RATING
100-200V ~
1.6A-0>9A, 50-60 HZ
DC INPUTS FOR REMOTE
POWER SUPPLY
SPECIFIED IN MANUAL
+12v @
8.5a
CONSOLE
RATING
100-200V ~
1.6A-0>9A, 5 0-60 HZ
DC INPUTS FOR REMOTE
POWER SUPPLY
SPECIFIED IN MANUAL
+12v @8 .5a
CONSOLE
RATING
100-200V ~
1.6A-0>9A, 50-60 HZ
DC INPUTS FOR REMOTE
POWER SUPPLY
SPECIFIED IN MANUAL
+12v @8 .5a
CONSOLE
90529
CONSOLE
STACK 1
STACK 2
90530

Cisco 3750G-12S - Catalyst Switch - Stackable Specifications

General

Brand	Cisco
Model	3750G-12S - Catalyst Switch - Stackable
Category	Switch
Language	English