10-3
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
Chapter 10 Scenario: Configuring Connections for a Cisco AnyConnect VPN Client
Example Topology Using AnyConnect SSL VPN Clients
Example Topology Using AnyConnect SSL VPN
Clients
Figure 10-1 shows an adaptive security appliance configured to accept requests
for and establish SSL connections from clients running the AnyConnect SSL VPN
software. The adaptive security appliance can support connections to both clients
running the AnyConnect VPN software and browser-based clients.
Figure 10-1 Network Layout for SSL VPN Scenario
Implementing the Cisco SSL VPN Scenario
This section describes how to configure the adaptive security appliance to accept
Cisco AnyConnect SSL VPN connections. Values for example configuration
settings are taken from the SSL VPN scenario illustrated in
Figure 10-1.
This section includes the following topics:
• Information to Have Available, page 10-4
• Configuring the Adaptive Security Appliance for the Cisco AnyConnect VPN
Client, page 10-5
132209
Inside
10.10.10.0
AnyConnect
Client
Browser-based
client
Outside
Security
Appliance
DNS Server
10.10.10.163
WINS Server
10.10.10.133
AnyConnect
Client
Internet
Internal
network
To Next Page
Loading...
Need help?
General
