Chapter 5 Installing Optional SSMs
Cisco AIP SSM and CSC SSM
5-8
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
Cisco AIP SSM and CSC SSM
The ASA 5500 series adaptive security appliance supports the AIP SSM
(Advanced Inspection and Prevention Security Services Module) and the CSC
SSM (Content Security Control Security Services Module), also referred to as the
intelligent SSM.
The AIP SSM runs advanced IPS software that provides security inspection.
There are two models of the AIP SSM: the AIP SSM 10 and the AIP SSM 20. Both
types look identical, but the AIP SSM 20 has a faster processor and more memory
than the AIP SSM 10. Only one module (the AIP SSM 10 or the AIP SSM 20) can
populate the slot at a time.
Table 5-4 lists the memory specifications for the AIP SSM 10 and the
AIP SSM 20.
For more information on the AIP SSM, see the Cisco ASA 5500 Series
Configuration Guide using the CLI.
The CSC SSM runs Content Security and Control software. The CSC SSM
provides protection against viruses, spyware, spam, and other unwanted traffic.
For more information on the CSC SSM, see the Cisco ASA 5500 Series
Configuration Guide using the CLI.
This section describes how to install and replace the SSM in the adaptive security
appliance.
Figure 5-5 lists the SSM LEDs.
Ta b l e 5-4 SSM Memory Specifications
SSM CPU DRAM
AIP SSM 10 2.0 GHz Celeron 1.0 GB
AIP SSM 20 2.4 GHz Pentium 4 2.0 GB
To Next Page
Loading...
Need help?
General
