Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Guide

10-9
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
Chapter 10 Scenario: Configuring Connections for a Cisco AnyConnect VPN Client
Implementing the Cisco SSL VPN Scenario
Step 2 Click Next.
Step 3 Step 5 of the SSL VPN Wizard appears. This step does not apply to AnyConnect
VPN client connections, so click Next again.
Configuring the Cisco AnyConnect VPN Client
For remote clients to gain access to your network with a Cisco AnyConnect VPN
client, you must configure a pool of IP addresses that can be assigned to remote
VPN clients as they are successfully connected. In this scenario, the pool is
configured to use the range of IP addresses 209.165.200.225–209.165.200.254
You must also specify the location of the AnyConnect software so that the
adaptive security appliance can push it to users.

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English