7-9
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
Chapter 7 Configuring the Adaptive Security Appliance
What to Do Next
Note If you get an error requesting a DES license or a 3DES-AES license, see
Appendix A, “Obtaining a 3DES/AES License” for information.
Note Based on your network security policy, you should also consider configuring the
adaptive security appliance to deny all ICMP traffic through the outside interface
or any other interface that is necessary. You can configure this access control
policy using ASDM. From the ASDM main page, click Configuration >
Properties > ICMP Rules. Add an entry for the outside interface. Set the IP
address to 0.0.0.0, the netmask to 0.0.0.0, and Action to deny.
What to Do Next
Configure the adaptive security appliance for your deployment using one or more
of the following chapters.
To Do This... See...
Configure the adaptive security appliance to
protect a DMZ web server
Chapter 8, “Scenario: DMZ Configuration”
Configure the adaptive security appliance for
remote-access VPN
Chapter 9, “Scenario: IPsec Remote-Access VPN
Configuration”
Configure the adaptive security appliance for SSL
VPN connections using software clients
Chapter 10, “Scenario: Configuring Connections for
a Cisco AnyConnect VPN Client”
Configure the adaptive security appliance for SSL
VPN connections using a web browser
Chapter 11, “Scenario: SSL VPN Clientless
Connections”
Configure the adaptive security appliance for
site-to-site VPN
Chapter 12, “Scenario: Site-to-Site VPN
Configuration”
To Next Page
Loading...
Need help?
General
