EasyManuals Logo
Home>Cisco>IP Phone>7945G

Cisco 7945G Administration Guide

Cisco 7945G
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #166 background imageLoading...
Page #166 background image
9-6
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 9 Troubleshooting and Maintenance
Cisco Unified IP Phone Resets Unexpectedly
If the phone is already in the Cisco Unified Communications Manager database, its configuration file
may be damaged. See the
“Creating a New Configuration File” section on page 9-5 for assistance.
Symptom: Cisco Unified IP Phone Unable to Obtain IP Address
If a phone is unable to obtain an IP address when it starts up, the phone may be not be on the same
network or VLAN as the DHCP server, or the switch port to which the phone is connected may be
disabled.
Make sure that the network or VLAN to which the phone is connected has access to the DHCP server,
and make sure that the switch port is enabled.
Cisco Unified IP Phone Resets Unexpectedly
If users report that their phones are resetting during calls or while idle on their desk, you should
investigate the cause. If the network connection and Cisco
Unified Communications Manager
connection are stable, a Cisco
Unified IP Phone should not reset on its own.
Typically, a phone resets if it has problems connecting to the Ethernet network or to
Cisco
Unified Communications Manager. These sections can help you identify the cause of a phone
resetting in your network:
• Verifying the Physical Connection, page 9-6
• Identifying Intermittent Network Outages, page 9-6
• Verifying DHCP Settings, page 9-7
• Checking Static IP Address Settings, page 9-7
• Verifying Voice VLAN Configuration, page 9-7
• Verifying that the Phones Have Not Been Intentionally Reset, page 9-7
• Eliminating DNS or Other Connectivity Errors, page 9-7
• Checking Power Connection, page 9-8
Verifying the Physical Connection
Verify that the Ethernet connection to which the Cisco Unified IP Phone is connected is up. For example,
check whether the particular port or switch to which the phone is connected is down and that the switch
is not rebooting. Also make sure that there are no cable breaks.
Identifying Intermittent Network Outages
Intermittent network outages affect data and voice traffic differently. Your network might have been
experiencing intermittent outages without detection. If so, data traffic can resend lost packets and verify
that packets are received and transmitted. However, voice traffic cannot recapture lost packets. Rather
than retransmitting a lost network connection, the phone resets and attempts to reconnect its network
connection.
If you are experiencing problems with the voice network, you should investigate whether an existing
problem is simply being exposed.

Table of Contents

Other manuals for Cisco 7945G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7945G and is the answer not in the manual?

Cisco 7945G Specifications

General IconGeneral
BrandCisco
Model7945G
CategoryIP Phone
LanguageEnglish

Related product manuals