Cisco 7945G Administration Guide

4-24
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Ethernet Configuration Menu
The Ethernet Configuration menu includes the options that are described in Table 4-15.
Ta b l e 4-15 Ethernet Configuration Menu Option
Option Description To Change
Span to PC Port Indicates whether the phone will forward packets transmitted
and received on the network port to the access port.
Enable this option if an application that requires monitoring
of the phone’s traffic is being run on the access port. These
applications include monitoring and recording applications
(common in call center environments) and network packet
capture tools that are used for diagnostic purposes.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Forwarding
Delay
Indicates whether the internal switch begins forwarding
packets between the PC port and switched port on the phone
when the phone becomes active.
• When forwarding delay is set to disabled, the internal
switch begins forwarding packets immediately.
• When forwarding delay is set to enabled, the internal
switch waits eight seconds before forwarding packets
between the PC port and the switch port.
Default is disabled.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.

Cisco 7945G Specifications

General

Brand	Cisco
Model	7945G
Category	IP Phone
Language	English