Cisco 7945G Administration Guide

4-23
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Power Save Configuration Menu
The Power Save Configuration menu displays the settings that control when the LCD screen on a phone
turns off to conserve power.
Table 4-14 describes the options on this menu.
For detailed information about configuring these settings, see the “Automatically Disabling the Cisco
Unified IP Phone Screen” section on page 6-8.
Ta b l e 4-14 Power Save Configuration Menu Options
Option Description To Change
Display On Time Time each day that the LCD screen turns on automatically
(except on the days specified in the Days Display Not
Active field).
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Display On
Duration
Length of time that the LCD screen remains on after
turning on at the time shown in the Display On Time
option.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Display Idle
Timeout
Length of time that the phone is idle before the display
turns off. Applies only when the display was off as
scheduled and was turned on by an end-user (by pressing a
button on the phone or lifting the handset).
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Days Display Not
Active
Days that the display does not turn on automatically at the
time specified in the Display On Time option.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Display On If
Incoming Call
Indicates whether the LCD screen automatically
illuminates when a call is received.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.

Cisco 7945G Specifications

General

Brand	Cisco
Model	7945G
Category	IP Phone
Language	English