Cisco 7945G Administration Guide

4-18
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
NTP Configuration Menu (SIP Phones Only)
The NTP Configuration menu displays information about the NTP server and mode configuration used
by SIP phones.
Table 4-11 describes the options on this menu.
UI Configuration Menu
The UI configuration menu displays the status of various user interface features on the phone. Table 4-12
describes the options on this menu.
Ta b l e 4-11 NTP Configuration Menu Options
Option Description To Change
NTP Server 1 IP address of the primary NTP server. Use Cisco Unified Communications
Manager Administration to modify.
NTP Server 2 IP address of the secondary or backup NTP server. Use Cisco Unified Communications
Manager Administration to modify.
NTP Mode 1 Primary server mode. Supported modes are Directed
Broadcast, Unicast, Multicast, Any cast.
Use Cisco Unified Communications
Manager Administration to modify.
NTP Mode 2 Secondary server mode. Supported modes are Directed
Broadcast, Unicast, Multicast, Any cast.
Display only—cannot configure.
Ta b l e 4-12 UI Configuration Menu Options
Option Description To Change
Auto Line Select Indicates whether the phone shifts the call focus to
incoming calls on all lines.
When this option is disabled, the phone only shifts the call
focus to incoming calls on the line that is in use. When this
option is enabled, the phone shifts the call focus to the line
with the most recent incoming call.
Default: Disabled
From Cisco Unified Communications
Manager Administration, choose
Device
> Phone > Phone Configuration.
BLF for Call Lists Indicates whether the Busy Lamp Field (BLF) is enabled
for call lists.
From Cisco Unified Communications
Manager Administration, choose
System
> Enterprise Parameters.
Reverting Focus
Priority
Indicates whether the phone shifts the call focus on the
phone screen to an incoming call or a reverting hold call.
Settings include:
Lower—Focus priority given to incoming calls.
Higher—Focus priority given to reverting calls.
Even—Focus priority given to the first call.
From Cisco Unified Communications
Manager Administration, choose System
> Device Pool.
See also: Hold Reversion.

Cisco 7945G Specifications

General

Brand	Cisco
Model	7945G
Category	IP Phone
Language	English