Cisco 7945G Administration Guide

4-22
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Wideband Headset Indicates whether wideband is enabled or disabled for the
headset.
Default: Disabled
• If Wideband Headset UI Control is
enabled, you or the user can use the
phone and choose
> User
Preferences > Audio Preferences >
Wideband Headset.
• If Wideband Headset UI Control is
disabled, from Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration to set
this value.
Note If you allowed this option to be
user controllable (in the
Wideband Headset UI Control
option), the user-configured value
takes precedence.
Enterprise
Advertise G.722
Codec
Enables/disables Cisco Unified IP Phones to advertise the
G.722 codec to Cisco Unified Communications Manager. If
enabled (default), and if each endpoint in the attempted call
supports G.722 in its capabilities set, Cisco Unified
Communications Manager will choose G.722 for the call.
Note When a phone is registered with a Cisco Unified
Communications Manager that does not support
this setting, the default is “Disabled.”
From Cisco Unified Communications
Manager Administration, choose System
> Enterprise Parameters.
Device Advertise
G.722 Codec
Allows you to override the Enterprise Advertise G.722
Codec on a per-phone basis.
The default is “Use System Default,” which means the value
configured for the Enterprise Advertise G.722 Codec
parameter gets used.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone.
Table 4-13 Media Configuration Menu Options (continued)
Option Description To Change

Cisco 7945G Specifications

General

Brand	Cisco
Model	7945G
Category	IP Phone
Language	English