Contents
vii
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Installing the Cisco Unified IP Phone 3-6
Attaching a Cisco Unified IP Phone Expansion Module 3-9
Adjusting the Placement of the Cisco Unified IP Phone 3-10
Adjusting Cisco Unified IP Phone Footstand and Phone Height 3-10
Securing the Phone with a Cable Lock 3-11
Mounting the Phone to the Wall 3-11
Verifying the Phone Startup Process 3-13
Configuring Startup Network Settings 3-14
Configuring Security on the Cisco Unified IP Phone 3-14
CHAPTER
4 Configuring Settings on the Cisco Unified IP Phone 4-1
Configuration Menus on the Cisco Unified IP Phone 7965G and 7945G 4-1
Displaying a Configuration Menu 4-2
Unlocking and Locking Options 4-3
Editing Values 4-3
Overview of Options Configurable from a Phone 4-4
Network Configuration Menu 4-5
Device Configuration Menu 4-10
Unified CM Configuration menu 4-11
SIP Configuration Menu (SIP Phones Only) 4-12
SIP General Configuration Menu 4-13
Line Settings Menu (SIP Phones Only) 4-14
Call Preferences Menu (SIP Phones Only) 4-14
HTTP Configuration Menu 4-15
Locale Configuration Menu 4-16
NTP Configuration Menu (SIP Phones Only) 4-17
UI Configuration Menu 4-17
Media Configuration Menu 4-19
Power Save Configuration Menu 4-22
Ethernet Configuration Menu 4-23
Security Configuration Menu 4-24
QoS Configuration Menu 4-25
Network Configuration 4-26
Security Configuration Menu 4-30
CTL File Menu 4-31
Trust List Menu 4-33
802.1X Authentication and Status 4-34