Cisco 8851 Administration Guide

Figure 15: Disengage Tabs
Step 3 Lift the phone to release it from the wall bracket. Pull the phone toward you.
Non-Lockable Wall Mount Components for Phone with Key
Expansion Module
This section describes how to install the Cisco IP Phone 8800 Series Wall Mount Kit with Single KEM on a
phone when the phone is connected to a Key Expansion Module.
The following figure shows the wall mount kit installed on the phone.
The following figure shows the phone with the wall mount kit from the side.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
130
Hardware and Accessory Installation
Non-Lockable Wall Mount Components for Phone with Key Expansion Module

Cisco 8851 Specifications

General

Brand	Cisco
Model	8851
Category	IP Phone
Language	English