Enable Feature Key Sync
When you enable the Feature Key Synchronization (FKS), the settings of call forwarding and do not disturb
(DND) on the server are synchronized to the phone. The changes in DND and call forwarding settings made
on the phone will also be synchronized to the server.
When you enable the Feature Key Synchronization (FKS), the settings of call forwarding and do not disturb
(DND) on the server are synchronized to the phone. The changes in DND and call forwarding settings made
on the phone will also be synchronized to the server. If configured, executives can access the Settings >
Assistant menu on the phone. Similarly, assistants can access the Settings > Executive menu.
Feature Key Sync must be enabled for all the executive and assistant users.
Note
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 88.
Procedure
Step 1 Select Voice > Ext [n] (where [n] is the extension number).
Step 2 In the Call Feature Settings section, set the Feature Key Sync field to Yes.
Step 3 Click Submit All Changes.
Related Topics
DND and Call Forwarding Status Sync, on page 227
Enable Call Forwarding Status Sync via XSI Service, on page 228
Enable DND Status Sync via XSI Service, on page 229
Enable Call Forwarding Status Sync via XSI Service
When call forwarding sync is enabled, the settings related to call forwarding on the server are synchronized
to the phone. The changes in call forwarding settings made on the phone will also be synchronized to the
server.
If XSI sync for call forwarding is enabled and the XSI host server or XSI account is not configured correctly,
the phone user can't forward calls on the phone.
Note
Before you begin
• Access the phone administration web page. See Access the Phone Web Page, on page 88.
• Configure the XSI host server and the corresponding credentials on the Voice > Ext (n) tab.
• When using Login Credentials for XSI server authentication, enter XSI Host Server, Login User
ID, and Login Password in the XSI Line Service section.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
228
Cisco IP Phone Administration
Enable Feature Key Sync
To Next Page
Loading...
Need help?
General
