DescriptionParameter
Amount of idle time before screen saver displays.
Enter the number of seconds of idle time to elapse
before the screen saver starts.
Default: 300
Screen Saver Wait
URL locating the (.png) file to display on the phone
screen background. If you select picture as as
screensaver type, this image displays as a screensaver
on the phone screen.
When you enter an incorrect URL to download a new
wallpaper, the phone fails to upgrade to the newer
wallpaper and displays the existing downloaded
wallpaper. If the phone does not have any wallpaper
downloaded earlier, it displays a gray screen.
Picture Download URL
Enter a URL or path for the location where the logo
image is saved. If you select logo as as screensaver
type, this image displays as a screensaver on the phone
screen.
Logo URL
Step 3 Click Submit All Changes.
Add a Logo as the Boot Display
If you want your user to see a logo icon when the phone restarts, enable this feature from the phone web page.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 88.
Procedure
Step 1 Select Voice > User.
Step 2 In the Screen section, select Logo from the Boot Display field. In the Logo URL field, enter a URL or path
for the location where the logo image is saved.
You can also download a picture and add it as a boot display: select Download Picture from the Boot Display
field. In the Picture Download URL field, enter a URL or path for the location where the picture is saved.
The logo must be a .jpg or a .png file. The phone has a fixed display area. So, if the original logo size doesn't
fit into the display area, you need to scale it to fit the screen. For the Cisco IP Phone 8800 Series, the logo
display area is at the mid-center of the phone screen. The display area size of the Cisco IP Phone 8800 Series
is 128x128.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
151
Cisco IP Phone Administration
Add a Logo as the Boot Display
To Next Page
Loading...
Need help?
General
