Cisco ASA 5512-X Configuration Guide

7-21
Cisco ASA Series Firewall CLI Configuration Guide
Chapter 7 ASA FirePOWER Module
Monitoring the ASA FirePOWER Module
Monitoring the ASA FirePOWER Module
The following topics provide guidance on monitoring the module. For ASA FirePOWER-related syslog
messages, see the syslog messages guide. ASA FirePOWER syslog messages start with message number
434001.
• Showing Module Status, page 7-21
• Showing Module Statistics, page 7-22
• Monitoring Module Connections, page 7-22
Showing Module Status
To check the status of a module, enter one of the following commands:
• show module [1 | sfr] [details]
Shows the status of modules. Include the 1 (for hardware modules) or sfr (for software modules)
keyword to see status specific to the ASA FirePOWER module. Include the details keyword to get
additional information, including the address of the device that manages the module.
• show module sfr recover
Displays the location of the boot image used when installing the module.
The following is sample output from the show module command for an ASA 5585-X with an ASA
FirePOWER hardware module installed:
hostname# show module
Mod Card Type Model Serial No.
---- -------------------------------------------- ------------------ -----------
0 ASA 5585-X Security Services Processor-10 wi ASA5585-SSP-10 JAF1507AMKE
1 ASA 5585-X FirePOWER Security Services Proce ASA5585-SSP-SFR10 JAF1510BLSA
Mod MAC Address Range Hw Version Fw Version Sw Version
---- --------------------------------- ------------ ------------ ---------------
0 5475.d05b.1100 to 5475.d05b.110b 1.0 2.0(7)0 100.10(0)8
1 5475.d05b.2450 to 5475.d05b.245b 1.0 2.0(13)0 5.3.1-44
Mod SSM Application Name Status SSM Application Version
---- ------------------------------ ---------------- --------------------------
1 FirePOWER Up 5.3.1-44
Mod Status Data Plane Status Compatibility
---- ------------------ --------------------- -------------
0 Up Sys Not Applicable
1 Up Up
The following example shows the details for a software module. Note that DC Addr indicates the address
of the FireSIGHT Management Center that manages this device.
hostname# show module sfr details
Getting details from the Service Module, please wait...
Card Type: FirePOWER Services Software Module
Model: ASA5555
Hardware version: N/A
Serial Number: FCH1714J6HP
Firmware version: N/A
Software version: 5.3.1-100
MAC Address Range: bc16.6520.1dcb to bc16.6520.1dcb

Cisco ASA 5512-X Specifications

General

Brand	Cisco
Model	ASA 5512-X
Category	Firewall
Language	English