Cisco ASA 5512-X Configuration Guide

10-2
Cisco ASA Series Firewall CLI Configuration Guide
Chapter 10 NAT Examples and Reference
Examples for Network Object NAT
Figure 10-1 Static NAT for an Inside Web Server
Procedure
Step 1 Create a network object for the internal web server.
hostname(config)# object network myWebServ
hostname(config-network-object)# host 10.1.2.27
Step 2 Configure static NAT for the object:
hostname(config-network-object)# nat (inside,outside) static 209.165.201.10
NAT for Inside Hosts (Dynamic NAT) and NAT for an Outside Web Server
(Static NAT)
The following example configures dynamic NAT for inside users on a private network when they access
the outside. Also, when inside users connect to an outside web server, that web server address is
translated to an address that appears to be on the inside network.
Outside
Inside
10.1.2.1
209.165.201.1
Security
Appliance
myWebServ
10.1.2.27
209.165.201.12
10.1.2.27 209.165.201.10
248772
Undo Translation

Cisco ASA 5512-X Specifications

General

Brand	Cisco
Model	ASA 5512-X
Category	Firewall
Language	English