Cisco ASR 900 Series Configuration Guide

Example: Differential Clock Recovery (DCR) for SAToP
Example: Differential Clock Recovery (DCR) Mode VT15 for SAToP
enable
configure terminal
recovered-clock 0 4
clock recovered 0 differential cem 0 0
controller SONET 0/4/0
rate OC48
sts-1 1
mode vt-15
vtg 1 t1 1 cem-group 0 unframed
vtg 1 t1 1 clock source Recovered 0
interface CEM 0/4/0
cem 1
rtp-present
end
Example: Differential Clock Recovery (DCR) Mode CT3 for SAToP
enable
configure terminal
recovered-clock 0 4
clock recovered 10 differential cem 1 0
controller SONET 0/4/0
rate OC48
sts-1 1
mode ct3
t1 1 cem-group 1 unframed
t1 1 clock source Recovered 10
interface CEM 0/4/0
cem 1
rtp-present
end
Example: Differential Clock Recovery (DCR) Mode T3 for SAToP
enable
configure terminal
recovered-clock 0 4
clock recovered 20 differential cem 6 0
controller SONET 0/4/6
rate OC48
sts-1 1
mode t3
cem-group 0 unframed
t3 clock source recovered 20
interface CEM 0/4/6
cem 1
rtp-present
end
Additional References for Clock Recovery
Related Documents
Document TitleRelated Topic
Cisco IOS Master Commands List, All Releases
Cisco IOS commands
1-Port OC-192 or 8-Port Low Rate CEM Interface Module Configuration Guide, Cisco IOS XE Everest 16.7.x (Cisco
ASR 900 Series)
147
Clock Recovery System for SAToP
Example: Differential Clock Recovery (DCR) for SAToP

Cisco ASR 900 Series Specifications

General

Brand	Cisco
Model	ASR 900 Series
Category	Network Router
Language	English