Cisco Catalyst 9404R Switch User Manual

Figure 28: Installing a Power Supply Blank Cover
Figure 29: Power Supply Blank Cover Installed
Power supply blank covers can be placed in any slot when fewer than 8 power supplies are installed in a
chassis.
Note
Power Cord Retainer Mechanism
This section shows how to correctly operate the power cord retainer, to tighten or loosen it while installing
or removing the power supply module.
Some of the illustrations do not include the power supply module, for the sake of clarity. The retainer is
otherwise permanently fixed to the power supply module.
Note
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
98
Removing and Replacing FRUs
Power Cord Retainer Mechanism

Cisco Catalyst 9404R Switch Specifications

General

Brand	Cisco
Model	Catalyst 9404R Switch
Category	Switch
Language	English