DescriptionSpecification
• 100 to 120 VAC operation
• 3.0A @ 3.3 V
• 17.09A @ 55V
• 200 to 240 VAC operation
• 3.0A @ 3.3 V
• 38.21A @ 55V
Power supply output
20 ms minimum.Output holdup time
2112W (total output power) or 2246.8 kVA (high-line operation)kVA rating
13
For 2112W—460.0 BTU per hour
For 950W—244.0 BTU per hour
Heat dissipation (in
British Thermal Units
(BTU))
5.0 lb (2.3 kg)Weight
13
The kVA rating listed for the power supply should be used as the sizing criteria for both UPS outputs
as well as standard circuits and transformers to power a switch
2100 W Power Supply AC Power Cords
The following table lists the specifications for the AC power cords that are available for the 2100 W AC-input
power supply. The table also includes references to power cord illustrations.
All 2100 W power supply power cord:
• Lengths range from 9.84 – 14 feet (3.0 – 4.293 meters); with most cord lengths between 13 and 14 feet
(4.013 and 4.293 meters)
• Have an IEC60320/C19 appliance connector at one end.
Figure 48: IEC60320/C19 Appliance Connector
Note
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
127
Specifications
2100 W Power Supply AC Power Cords
To Next Page
Loading...
Need help?
General