Cisco Catalyst 9404R Switch User Manual

Site Preparation Checklist
The following table lists the site-planning activities that you should perform prior to installing the switch.
Completing each activity helps ensure a successful switch installation.
Table 5: Site Preparation Checklist
DateTimeVerified
By
ActivityTask No.
Space evaluation
• Space and layout
• Floor covering
• Impact and vibration
• Lighting
• Maintenance access
1
Environmental evaluation
• Ambient temperature
• Humidity
• Altitude
• Atmospheric contamination
• Airflow
2
Power evaluation
• Input power type
• Power receptacles (Depends on power supply)
1
• Receptacle proximity to the equipment.
• Dedicated (separate) circuits for redundant power supplies.
• UPS for power failures
2
3
Grounding evaluation
• Circuit breaker size
• CO ground (AC powered systems)
4
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
38
Preparing for Installation
Site Preparation Checklist

Cisco Catalyst 9404R Switch Specifications

General

Product Type	Modular Switch
Form Factor	Rack-mountable
Slot Capacity	4
Management	Cisco IOS XE
Model	Catalyst 9404R
Product Series	Catalyst 9400 Series
Uplink Ports	Varies by module
Downlink Ports	Varies by module
Supported Modules	C9400-LC-24XS, C9400-LC-48T, C9400-LC-48U
Power Supply	AC or DC
Power Supply Options	AC or DC
Redundancy	Power supply redundancy
Operating Temperature	0 to 40 °C
Storage Temperature	-40 to 70 °C
Relative Humidity	5% to 90% noncondensing