Cisco Catalyst 9404R Switch User Manual

Some equipment racks provide a power strip along the length of one of the rear posts. If your rack has this
feature, consider the position of the strip when planning fastener points. Before installing the brackets on the
chassis, determine whether to install the chassis from the front or the rear of the rack.
Note
Procedure
Step 1 Remove and discard the mounting ears and the ten mounting screws of the chassis. Do not reuse them during
any part of the installation process.
Figure 17: Remove the Mounting Ears
Step 2 Install the rack ear brackets on the left and right sides of the chassis. These brackets connect the chassis to
the rack.
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
68
Installing the Switch
Rack-Mounting the Chassis in a NEBS-Compliant Mode

Cisco Catalyst 9404R Switch Specifications

General

Brand	Cisco
Model	Catalyst 9404R Switch
Category	Switch
Language	English