Cisco Explorer Series User Manual

Appendix D
Adding an HDD Test Server to the BFS
156 734375 Rev H
Placing the HDD Performance Specification File on
the HDD Test Server
Note: This procedure can be used for systems that support multiple or single sites.
1 In the Broadcast File Server List window, double-click the hddtest server. The
hddtest server opens to show its contents.
2 Click File > New File. The Set Up File window opens.
3 Follow these instructions to enter data into the fields of the Set Up File window:
 Click in the File Name field and type testparam.cfg.
 Click the Source Name arrow and select Out of Band.
 Click in the File Path field and type /dvs/resapp/Tools/testparam.cfg.
Result: The Set Up File window is configured as shown in the following
example.
4 Click Save to save your changes and close the Set Up File window. The HDD
Performance Specification file is placed on the HDD Test server. As a result, the
testparam.cfg file appears beneath the open hddtest server.
5 Click File > Close to close the Broadcast File Serve List window. You have
successfully set up the BFS to support the HDD Test.

Cisco Explorer Series Specifications

General

Brand	Cisco
Model	Explorer Series
Category	Media Converter
Language	English