FTP Download Option
You can use FTP to obtain the EMM data from us when you order your DHCTs or
CableCARD modules.
If you choose to load EMMs through the FTP site, we will notify you by e-mail
whenever new EMMs are available. The e-mail includes a secure link directly to the
FTP server. You can click on the link in the e-mail to start downloading EMMs
immediately.
Downloading the EMM File
1 From the e-mail message, click the link that references your EMM file on the FTP
server. A window opens on your PC that lets you specify the directory on your
PC where you want to save the EMM file.
Note: The exact method you use to save the downloaded EMM file varies based
upon the e-mail software you use on your PC.
2 Click on the link in the e-mail that references your EMM file on the Cisco FTP
server.
3 Save the EMM file in the directory on your PC you choose.
Example: You might choose to save the file in the /temp directory.
4 Choose one of the following procedures:
To use a CD recorder to copy the EMM TAR file to a CD, go to Copying the
EMM File to a CD (on page 58).
To use a network connection between your PC and the DNCS to FTP the
EMM TAR file to the DNCS, go to Send the EMM File to the DNCS Using
FTP (on page 59).
To Next Page
Loading...
Need help?
General
