Cisco Explorer Series User Manual

Chapter 2 Staging Preparations
14 734375 Rev H
Create EMM Directories
Creating an EMM File Directory
You must create a directory for storing and extracting the EMM files if you are
downloading the files using FTP.
Note: You do not need to create this directory if you are loading the EMM files from
a CD.
Follow these instructions to create the /dvs/dncs/emmcds directory.
1 Open an xterm window on the DNCS.
2 Type mkdir /dvs/dncs/emmcds and press Enter. The system creates the
/dvs/dncs/emmcds directory.
3 Do not close the xterm window.
Creating an EMM Log Directory
You must create a directory for storing the EMM log files that result from loading
the EMM images files onto the DNCS.
Follow these instructions to create the /dvs/dncs/emmlogs directory.
1 In the open xterm window, type mkdir /dvs/dncs/emmlogs and press Enter. The
system creates the /dvs/dncs/emmlogs directory.
2 Type exit and press Enter to close the xterm window.

Cisco Explorer Series Specifications

General

Brand	Cisco
Model	Explorer Series
Category	Media Converter
Language	English