Chapter 5 Obtain and Load EMM Data
Copy the EMM File
After you download the EMM file, and before you load the EMMs onto the DNCS,
you must first copy the EMM file to a CD. This section provides procedures for
copying the EMM file to a CD before loading the file onto the DNCS.
Copying the EMM File to a CD
Important: Be sure you know how to use your CD recorder to copy files before
starting this procedure.
1 Insert a blank CD into the CD recorder of your PC.
2 Copy the EMM file from the directory where you saved it on your PC to the CD.
Note: If necessary, refer to the user’s guide that accompanied your CD recorder
for detailed instructions for copying files.
3 Eject the CD.
Copying the EMM File to the DNCS
1 Insert the CD into the CD-ROM drive of your DNCS and the system mounts the
CD to /cdrom/cdrom0.
2 Open an xterm window on the DNCS.
Note: We recommend that you store your EMM file in the /dvs/dncs/emmcds
directory on the DNCS. If necessary, see Create EMM Directories (on page 14)
for additional information.
3 Type cd /dvs/dncs/emmcds and press Enter.
4 Type cp /cdrom/cdrom0/* . and press Enter. The system copies the EMM TAR
file on the CD to the /dvs/dncs/emmcds directory on the DNCS.
Important: After typing /cdrom/cdrom0/ be sure to type the * followed by a
space and a period (.).
5 When the system has finished copying the EMM tar file, type eject cd and press
Enter to eject the CD.
To Next Page
Loading...
Need help?
General
