Cisco SF 302-08P User Manual

Configuring Security
802.1X
Cisco Small Business 300 Series Managed Switch Administration Guide 217
16
STEP 5 Click Apply, and the switch is updated.
Defining 802.1X Port Authentication
The Port Authentication Page enables configuration of several of the 802.1X
parameters for each port. Since some of the configuration changes are only
possible while the port is in
Force Authorized state, such as the authentication
method. We recommended that you change the port control to
Force Authorized
before making changes. When the configuration is complete, return the port
control to its previous state.
NOTE A port with 802.1x defined on it cannot become a member of a LAG.
To define 802.1X authentication:
STEP 1 Click Security > 802.1X > Port Authentication. The Port Authentication Page
displays.
This page displays authentication settings for all ports.
Modifying 802.1X Port Authentication Settings
STEP 1 Click Security > 802.1X > Port Authentication. The Port Authentication Page
displays.
STEP 2 Select a port, and click Edit. The Edit Port Authentication Page displays.
STEP 3 Enter the parameters.
• Port—Select a port.
• User Name—Displays the username of the port.
• Current Port Control—Displays the current port authorization state. If the
state is Authorized, the port is either authenticated or the Administrative
Port Control is Force Authorized. Conversely, if the state is Unauthorized,
then the port is either not authenticated or the Administrative Port Control is
Force Unauthorized.

Cisco SF 302-08P Specifications

General

Brand	Cisco
Model	SF 302-08P
Category	Switch
Language	English