Cisco SF 302-08P User Manual

Configuring Quality of Service
QoS Advanced Mode
Cisco Small Business 300 Series Managed Switch Administration Guide 267
18
- Out of Profile DSCP—The DSCP values of packets exceeding the
defined CIR value are remapped to a value based on the Out Of Profile
DSCP Mapping Table.
STEP 4 Click Apply. The switch is updated.
Configuring a Policy
The Policy Table Map Page displays the list of advanced QoS polices defined in
the system. The page also allows you to create and delete polices. Only those
policies that are bound to an interface are active (see Policy Binding Page).
Each policy consists of:
• One or more class maps of ACLs which define the traffic flows in the policy.
• One or more aggregates that applies the QoS to the traffic flows in the
policy.
After a policy has been added, class maps can be added by using the Policy
Class Maps Page.
To add a QoS policy:
STEP 1 Click Quality of Service > QoS Advanced Mode > Policy Class Maps. The Policy
Class Maps Page
opens.
This page displays the list of defined policies.
STEP 2 Click Policy Class Map Table to display the Policy Class Maps Page.
OR
Click Add to open the Add Policy Page.
STEP 3 Enter the name of the new policy in the New Policy field.
STEP 4 Click Apply. The QoS policy profile is added, and the switch is updated.

Cisco SF 302-08P Specifications

General

Brand	Cisco
Model	SF 302-08P
Category	Switch
Language	English