Cisco SF 302-08P User Manual

VLAN Management
Creating VLANs
Cisco Small Business 300 Series Managed Switch Administration Guide 111
11
To change the default VLAN:
STEP 1 Click VLAN Management > Default VLAN Settings. The Default VLAN Settings
Page
opens.
STEP 2 Enter the value for the following field:
• Current Default VLAN ID—Displays the current default VLAN ID.
• Default VLAN ID After Reset—Enter a new VLAN ID to replace the default
VLAN ID after reboot.
STEP 3 Click Apply.
STEP 4 Click Save (in the upper-right corner of the window) and save the Running
Configuration to the Startup Configuration.
The Default VLAN ID After Reset becomes the Current Default VLAN ID after
you reboot the switch.
Creating VLANs
You can create a VLAN, but this has no effect until the VLAN is attached to at least
one port, either manually or dynamically. Ports must always belong to one or more
VLANs. The Cisco Sx300 Series switch supports 256 VLANs; default VLAN
included.
Each VLAN must be configured with a unique VID (VLAN ID) with a value from
1 to 4094. The switch reserves VID 4095 as the Discard VLAN. All packets
classified to the Discard VLAN are discarded at ingress, and are never forwarded
to a port.

Cisco SF 302-08P Specifications

General

Brand	Cisco
Model	SF 302-08P
Category	Switch
Language	English