Cisco SF220-24 Administration Guide

Administration: Discovery
Configuring CDP
Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x 103
8
- Management Power Level —(Only applicable for PoE models) Display the
supplier's request to the powered device for its Power Consumption TLV.
The switch always displays “No Preference” in this field.
Displaying CDP Neighbor Information
The CDP Neighbor Information page displays CDP information received from
neighboring devices. After timeout (based on the value received from the
neighbor Time To Live TLV during which no CDP PDU was received from a
neighbor), the information is deleted.
To view the CDP neighbor information:
STEP 1 Click Administration > Discovery CDP > CDP Neighbor Information.
The following fields are displayed:
• Device ID—Neighbor’s device ID.
• Local Interface—Number of the local port to which the neighbor is
connected.
• Advertisement Version—CDP protocol version.
• Time to Live—Time interval (in seconds) after which the information for this
neighbor is deleted.
• Capabilities—Capabilities advertised by neighbor.
• Platform—Information from Platform TLV of neighbor.
• Neighbor Interface—Outgoing interface of the neighbor.
STEP 2 Select a neighbor device, and click Detail.
The following fields about the neighbor are displayed:
• Device ID—Identifier of the neighboring device ID.
• Local Interface—Interface number of port through which frame arrived.
• Advertisement Version—Version of CDP.
• Time to Live—Time interval (in seconds) after which the information for this
neighbor is deleted.

Cisco SF220-24 Specifications

General

Brand	Cisco
Model	SF220-24
Category	Switch
Language	English